Journals / Technological Applied Sciences / 2008 / Cilt: 3 Sayı: 4

THE EFFECT AT WEAR BEHAVİOR OF COATİNG LAYER OF PROPORTİON GASES N2

N2 GAZI ORANININ KAPLAMA TABAKASININ AŞINMA DAVRANIŞINA ETKİSİ

Pages
627–635
Publication Date
2008-05-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Coating layer was observed increase of wear resistance and hardness to be proportions carburs and nitrurs.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, high Cr at FeCrC powder was coated on the surface 0,3 C steel with PTA (plasma tungsten arc) method.
📊
Key Findings & Data:The surfaces coated with PTA method were exanimate of surface wear SEM-EDS and XRD analysis.As a result of; in the coated layer was observer metal carburs and nitrurs.
💡
Conclusion & Impact:Coating layer was observed increase of wear resistance and hardness to be proportions carburs and nitrurs.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:PTA · FeCrC · Cr(C

Abstract

In this study, high Cr at FeCrC powder was coated on the surface 0,3 C steel with PTA (plasma tungsten arc) method. The surfaces coated with PTA method were exanimate of surface wear SEM-EDS and XRD analysis.As a result of; in the coated layer was observer metal carburs and nitrurs. Coated layer were different loads and distancies of abrasive wear. Coating layer was observed increase of wear resistance and hardness to be proportions carburs and nitrurs.

Özet

Bu çalışmada; yüksek Cr'lu FeCrC tozu 0,3 C'lu çeliğin yüzeyine Plazma Transfer Ark (PTA) yöntemiyle kaplanmıştır. PTA yöntemiyle alaşımlandırılmış kaplama tabakaların aşınma yüzeylerinin SEM-EDS ve XRD analizleri incelenmiştir. Sonuç olarak; kaplama tabakasında metal karbürler ve nitrürlerin oluştuğu görülmüştür. Kaplama tabaksı farklı yük ve mesafelerde abrasiv aşınma testine tabi tutulmuştur. Kaplamanın karbür ve nitrür oranına bağlı olarak kaplama tabakasının sertliğinin ve aşınma direncinin arttığı görülmüştür.

🔖

Cite This Article

Gür, A. K., Yıldız, T. (2008). THE EFFECT AT WEAR BEHAVİOR OF COATİNG LAYER OF PROPORTİON GASES N2. Technological Applied Sciences, Cilt: 3 Sayı: 4, 627–635. https://doi.org/10.12739/10.12739

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...