Journals / Technological Applied Sciences / 2009 / Cilt: 4 Sayı: 4

PROVIDING EQUALITY OF VOLTAGES BASED ON MICROCONTROLLER FOR PARALLEL CONNECTION OF ALTERNATORS

ALTERNATÖRLERİN PARALEL BAĞLANMA ŞARTLARINDAN GERİLİM EŞİTLİĞİNİN MİKRODENETLEYİCİ İLE GERÇEKLEŞTİRİLMESİ

Pages
348–359
Publication Date
2009-05-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

When the utility and alternator signals are equal to each other, the equality of voltages is provided.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:One of the four conditions that is required during connecting alternators to utility in parallel is the equality of alternator and utility voltages.
📊
Key Findings & Data:These signals are matched in order to arrange the voltage of alternators exciting coil with changing it's duty ratio until alternator signal is equal to the reference signal by the PIC16F877 microcontroller and the program written in C programming language.
💡
Conclusion & Impact:When the utility and alternator signals are equal to each other, the equality of voltages is provided.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Paralel Bağlama · Gerilim Eşitliği · Senkronizasyon

Abstract

One of the four conditions that is required during connecting alternators to utility in parallel is the equality of alternator and utility voltages. In this study, the equality of voltages for the parallel connection of alternators have been achieved using microcontroller. The study provides automatic control of excitation voltage of alternator for the equality of voltages. Waveforms of alternating voltages are converted into DC wave using the AC/DC converter after being perceived by the AC/AC signal sensing circuit. These signals are matched in order to arrange the voltage of alternators exciting coil with changing it's duty ratio until alternator signal is equal to the reference signal by the PIC16F877 microcontroller and the program written in C programming language. When the utility and alternator signals are equal to each other, the equality of voltages is provided.

Özet

Alternatörlerin şebekeye paralel bağlanması sırasında gerekli olan dört şarttan bir tanesi alternatör ve şebeke gerilimlerinin eşitliğidir. Bu çalışmada, gerilim eşitliği mikrodenetleyici tabanlı olarak gerçekleştirilmiştir. Alternatör ve şebekeye ait gerilim sinyalleri AA/AA sinyal algılama devresine uygulanarak, AA/DA konvertör devresinin girişine uygun düzeye dönüştürülmüştür. Konvertör devresinden alınan DA sinyaller PIC16F877 mikrodenetleyicisinin analog giriş kanallarına uygulanmıştır. C programlama dilinde hazırlanan yazılım yardımıyla, alternatör uyartım akımı otomatik olarak ayarlanarak gerilim eşitliği sağlanmıştır. Deneysel sonuçlar, gerçekleştirilen sistem yardımıyla alternatör ve şebeke gerilim değerlerinin hatasız şekilde otomatik olarak eşitlendiğini göstermiştir.

🔖

Cite This Article

Bayhan, S. (2009). PROVIDING EQUALITY OF VOLTAGES BASED ON MICROCONTROLLER FOR PARALLEL CONNECTION OF ALTERNATORS. Technological Applied Sciences, Cilt: 4 Sayı: 4, 348–359. https://doi.org/10.12739/10.12739

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...