Journals / Technological Applied Sciences / 2014 / Cilt: 9 Sayı: 4

-

ISIL İŞLEM GÖRMÜŞ 30MnB5 ÇELİĞİNİN MEKANİK ÖZELLİKLERİNİN VE ÇENTİK DARBE GEÇİŞ SICAKLIĞININ İNCELENMESİ

Pages
43–50
Publication Date
2014-10-07
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, charpy test was performed at temperature range from (-80o C) to (+40o C) for establishing the transition temperature of the material.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:30MnB5steels has a wide usage range such as in automotive industry for design of vehicles, which has low height and high securıty, used at high temperatures and for agricultural equipments used at low temperatures.
📊
Key Findings & Data:Once the 30MnB5 steel was air quenched and then tempered.
💡
Conclusion & Impact:Also, charpy test was performed at temperature range from (-80o C) to (+40o C) for establishing the transition temperature of the material.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:30MnB5 · Isıl İşlem · Mekanik Özellikler

Abstract

30MnB5steels has a wide usage range such as in automotive industry for design of vehicles, which has low height and high securıty, used at high temperatures and for agricultural equipments used at low temperatures. The aim of this study is determine both the mechanical properties and transition temperature. Once the 30MnB5 steel was air quenched and then tempered. The microstructure analysis and hardness measurements was realized. Also, charpy test was performed at temperature range from (-80o C) to (+40o C) for establishing the transition temperature of the material.

Özet

30MnB5 çeliği yüksek sıcaklıklarda, otomotiv endüstrisinde yüksek güvenlikli düşük ağırlıklı araçların tasarlanmasından, çok düşük sıcaklıklarda kullanılabilen tarım alet ve makinalarına kadar çok geniş aralıkta kullanım alanına sahiptir. Bu farklı çalışma aralıklarında kullanılan 30MnB5 çeliğinin hem mekanik özelliklerinin hem de çentik darbe geçiş sıcaklığının belirlenmesi amacıyla bu çalışma yapılmıştır. Bu çalışmada, 30MnB5 malzemesi öncelikle suda sertleştirilmiş ve menevişleme işlemi uygulanmıştır. Ardından ısıl işlem görmüş malzemelerin içyapı ve sertlik ölçümleri gerçekleştirilmiştir. Aynı zamanda dönüşüm sıcaklığının tespiti için (-80 o C)–(+40 o C) aralığında çentik darbe testi yapılmıştır.

🔖

Cite This Article

Kayral, S. (2014). -. Technological Applied Sciences, Cilt: 9 Sayı: 4, 43–50. https://doi.org/10.12739/10.12739

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Callister, D.W. and Rethwisch, D.D., (2013). Malzeme Bilimi ve Mühendisliği, Nobel Yayınevi, 978-605-133-418-9.
  2. Güleç, Ş., (1985). Malzeme Ders Notları”, İTÜ Makine Fakültesi, http://www.salzgitterflachstahl.de/fileadmin/mediadb/szfg/informationsmaterial/produktinformationen/warmgewalzte_produkte/eng/30mnb5.pdf
  3. Yüksel, M., Meran, C., (2010). Malzeme Bilgisine Giriş, TMMOB MMO, Yayın No:545.
  4. Capelle, J., Furtado, J., Azari, Z., Jallais, S., and Pluvinage, G., (2013).“Design Based On Ductile-Brittle Transition Temperature for API 5L X65 Steel Used For Dense CO2 Transport, Engineering Fracture Mechanics, 270-280.
  5. Cerit, M., (1994). “Makine Mühendisliği El Kitabı Cilt 1:Üretim veTasarım”,TMMOB,1994.http://www.yagmurdemircelik.com/documents/Eregli.pdf
  6. Nazari, A., Milani, A.A., Khalaj, G., (2012). “Modelling Ductile to Brittle Transition Temperature of Functionally Graded Steels by ANFIS”, Applied Mathematical Modelling, 3903-3915.
  7. http://www.yasari1.sakarya.edu.tr/dersler/isi.ders.notu.pp.pdf, Prof.Dr. Yaşar İslamoğlu Ders Notları.
  8. http://www.atacelik.com/etkileri.html
  9. http://www.baydemir.com.tr/detay/15/ala%C5%9Fimelementler%C4
  10. %B0n%CB0n-%C3%A7el%C4%B0k-yapisina-etk%C4%B0s%C4%B0
  11. http://www.haiyangshiyou.com/esdep/master/wg02/l0100.htm