SavedAdd your journal

Journals / Technological Applied Sciences / 2018 / Cilt: 13 Sayı: 1

PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE

Abdullah KARABACAK
Aykut ÇANAKÇI
Serdar ÖZKAYA
Müslim ÇELEBİ
Emre YALÇIN
Pages
29–33
Publication Date
2018-01-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was showed that the uniform distribution of dispersion of SiC-B4C nano particles within Al2024 matrix.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper, production and properties of Al2024-SiC-B4C hybrid nanocomposite produced using mechanical alloying and hot pressing by powder metallurgy method.
📊
Key Findings & Data:First of all, Al2024, SiC and B4C powders were alloyed in planetary ball mill at room temperature with 8 hours to be obtained homogeneous powder distribution.
💡
Conclusion & Impact:It was showed that the uniform distribution of dispersion of SiC-B4C nano particles within Al2024 matrix.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Powder metallurgy · SiC · Nanocomposite

Özet

In this paper, production and properties of Al2024-SiC-B4C hybrid nanocomposite produced using mechanical alloying and hot pressing by powder metallurgy method. First of all, Al2024, SiC and B4C powders were alloyed in planetary ball mill at room temperature with 8 hours to be obtained homogeneous powder distribution. After, the hot pressing technique was used for producing hybrid nanocomposite with 2 weight percentage (1 wt.% SiC and 1 wt.% B4C respectively) of SiC and B4C reinforcements. The mechanical (hardness, tensile strength, bending strength, fracture surface), physical (density, porosity) of properties and microstructure of Al2024-SiC-B4C hybrid nanocomposite were investigated. It was showed that the uniform distribution of dispersion of SiC-B4C nano particles within Al2024 matrix.

🔖

Cite This Article

KARABACAK, A., ÇANAKÇI, A., ÖZKAYA, S., ÇELEBİ, M., YALÇIN, E. (2018). PRODUCTION AND PROPERTIES OF AL2024-2 WT.% (SiC-B4C) HYBRID NANOCOMPOSITE. Technological Applied Sciences, Cilt: 13 Sayı: 1, 29–33. https://ajindex.com/articles/1007735

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Miracle, D.B., (2005). Composites Science and Technology, 2526, 65
  2. Mazahery, A. and Shabani, M.O., (2012). Journal of Materials Engineering and Performance, 247, 21
  3. Toptan, F., Kilicarslan, A., Karaaslan, A., Ciğdem, M., and Kerti, I., (2010). Materials and Design, 87, 31
  4. LIM, K.Y., KIM, Y.W., and KIM, K.J., (2014). Electrical properties of SiC ceramics sintered with 0.5 wt% AlN–RE2O3, (J) Ceramics International, 40:8885−8890
  5. Liu, Y., Chai, N., Qin, H., Li, Z., Ye, F., and Cheng, L., (2015). Tensile Fracture Behavior and Strength Distribution of SiCf/SiC Composites with Different SiBN Interface Thicknesses, (J) Ceramics International, 41:1609−1616
  6. Tuncer, N., Tasdelen, B., and Arslan, G., (2011). Ceramics International 37, 2861–2867
  7. Alizadeh, A., Taheri-Nassaj, E., and Hajizamani, M., (2011). Hot Extrusion Process Effect on Mechanical Behavior of Stir Cast Al Based Composites Reinforced with Mechanically Milled B4C Nanoparticles, J Mater Sci Technol, 27(12):1113–9
  8. Abdoli, H., Asgharzadeh, H., and Salahi, E., (2009). Sintering Behavior of Al–AlNnanostructured Composite Powder Synthesized by High-Energy Ball Milling, J Alloys Compd, 473, 116, 22
  9. Sajjadi, S.A., Torabi Parizi, M., Ezatpour, H.R., and Sedghic, A., (2012). Fabrication of A356 Composite Reinforced with Micro and Nano Al2O3 Particles by a Developed Compocasting Method and Study of Its Properties, J Alloys Compd, 511, 226–31
  10. Erdemir, F., Canakci, A., Varol, T., and Ozkaya, S., (2015). Journal of Alloys and Compounds, 589, 644.