Dergiler / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2001 / Cilt: 7 Sayı: 1

EMPRENYELİ SARIÇAM (Pinus sylvestris L.) ODUNUNDAN ÜRETİLEN LAMİNE AĞAÇ MALZEMELERİN YANMA ÖZELLİKLERİ

THE COMBUSTION PROPERTIES OF LAMINATED WOOD MATERIALS PREPARED FROM SCOTCH PINE (Pinus sylvestris L.)

Sayfa
131–138
Yayın Tarihi
2001-01-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗

Özet

Bu çalışmada, sarıçam odunu örnekleri Sodyum perborat, Sodyum tetra borat, İmersol (I-WR 2000) ve TanalithCBC (T-CBC) maddeleri ile daldırma metoduna göre emprenye edildikten sonra Desmodur-VTKA tutkalı kullanılarak üretilen 3 katmanlı lamine ağaç malzemenin (LAM) ASTM-E 69 standardında belirlenen esaslara uyularak yanma özellikleri belirlenmiştir. Sonuç olarak; en fazla kütle kaybı (60.83 g) I-WR2000 ile işlem gören lamine örneklerde, CO miktarı (6340.85 ppm) T-CBC ile işlem gören masif ağaç malzemede, CO2 miktarı (% 7.48), O2 miktarı (% 13.03 ) ve ilk ağırlığa oranla en fazla yanma (% 82.73) kontrol örneğinde, sıcaklık artışı (406.55 o C) T-CBC ile işlem gören lamine örneklerde elde edilmiştir. Buna göre; lamine örneklerin yanma deneyinde sodyum tetra borat ve sodyum perborat yanmayı azaltıcı emprenye maddesi olarak tespit edilmiştir.

Abstract

In this study, the combustion properties of 3 ply laminated wood material, which was produced from scotch pine (Pinus sylvestris L.) impregnated with Sodium perborat, Sodium tetra borat, Imersol (I-WR 2000) and TanalithCBC (T-CBC) by using dipping method has been investigated. Prepared materials have been bonded with Desmodur- VTKA adhesive and tested according to the procedure of ASTM-E 69 standards. As a result, the highest weight loss (60.83 g) in laminated sample impregnated with I-WR 2000, CO rate (6340.85 ppm) in neutral sample impregnated with T-CBC, CO2 rate (7.48 %), O2 rate (13.03 %) and according to the first weight rate the highest combustion rate (82.73 %) in control samples, heat increasing (406.55 o C) in laminated sample impregnated with T-CBC have been obtained. According to these results, in the combustion tests of laminated samples sodium tetra borat and sodium perborat have been determined as a successful fire retardant chemical.

Anahtar kelimeler
🔖

Bu Makaleye Atıf Yap

Özen, R., Özçifçi, A. (2001). EMPRENYELİ SARIÇAM (Pinus sylvestris L.) ODUNUNDAN ÜRETİLEN LAMİNE AĞAÇ MALZEMELERİN YANMA ÖZELLİKLERİ. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 7 Sayı: 1, 131–138. https://ajindex.com/articles/1059763

📄 Tam Metin PDF Okuyucu