KaydedilenlerDerginizi ekleyin

Dergiler / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2026 / Cilt: 32 Sayı: 6

Boya duyarlı güneş hücrelerinde güncel gelişmeler: Malzemeler, mekanizmalar ve performans artırma stratejileri

Recent advances in dye-sensitized solar cells: Materials, mechanisms, and performance enhancement strategies

Olcay Kaan Çakır, Sule Erten Ela

Sayfa
1238–1253
Yayın Tarihi
2026-10-08
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗

Özet

Boya duyarlı güneş hücreleri (DSSC’ler), uygun maliyetleri, esnek ve yarı saydam yapıları, farklı uygulama alanlarına uyarlanabilirlikleri sayesinde geleneksel fotovoltaik teknolojilere alternatif teknoloji olarak öne çıkmaktadır. Son yıllarda malzeme mühendisliği, cihaz mimarisi ve performans optimizasyonunda kaydedilen ilerlemeler, DSSC’leri özellikle iç mekân, giyilebilir ve bina entegreli enerji sistemlerinde önemli bir araştırma konusu haline getirmiştir. Bu derleme, DSSC teknolojisindeki güncel gelişmeleri sistematik olarak ele alarak, n-tipi ve p-tipi hücre yapıları ile fotoanotlar, boyar maddeler, elektrolitler ve karşı elektrotlar gibi temel bileşenlere odaklanmaktadır. Malzeme seçimi ve nanoyapı mühendisliğinin fotovoltaik performans üzerindeki etkileri detaylandırılırken; sıvı elektrolitlerin termal kararsızlığı ve sızma riski, organik boyaların uzun ömür sorunları, verimlilik limitleri ve platin karşı elektrotların yüksek maliyeti gibi, ticarileşmenin önündeki başlıca teknik ve ekonomik engeller de vurgulanmaktadır. Katı hal elektrolitler esnek cihazlar, tekstil entegrasyonu ve düşük ışıkta iç mekân uygulamaları gibi yeni nesil kullanım alanları ile birlikte, gelecekte DSSC’lerin karşılaşabileceği fırsatlar ve araştırma yönelimleri de tartışılmaktadır. Sonuç olarak, DSSC’ler; maliyet, stabilite ve performans dengesini sağlayan çok yönlü ve yenilikçi bir fotovoltaik platform olarak gelecekte geniş kullanım kapasitesi bulunan bir teknolojidir.

Abstract

Dye-sensitized solar cells (DSSCs) have emerged as an alternative photovoltaic technology to conventional systems due to their low cost, flexibility, semi-transparency, and adaptability to various application domains. In recent years, advancements in materials engineering, device architecture, and performance optimization have made DSSCs a prominent topic of research, particularly in indoor, wearable, and building-integrated energy systems. This review systematically addresses recent developments in DSSC technology, focusing on fundamental components such as n-type and p-type cell architectures, photoanodes, dyes, electrolytes, and counter electrodes. While the effects of material selection and nanostructure engineering on photovoltaic performance are detailed, major technical and economic barriers to commercialization such as the thermal instability and leakage risk of liquid electrolytes, the limited lifetime of organic dyes, efficiency ceilings, and the high cost of platinum-based counter electrodes are also highlighted. Opportunities and future research directions are discussed in the context of solid-state electrolytes and their potential in next-generation applications such as flexible devices, textile integration, and low-light indoor environments. In conclusion, DSSCs represent a versatile and innovative photovoltaic platform with significant future application potential, offering a promising balance of cost, stability, and performance.

Anahtar kelimeler
🔖

Bu Makaleye Atıf Yap

Çakır, O. K., Ela, S. E. (2026). Boya duyarlı güneş hücrelerinde güncel gelişmeler: Malzemeler, mekanizmalar ve performans artırma stratejileri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 32 Sayı: 6, 1238–1253. https://doi.org/10.65206/pajes.90567

📄 Tam Metin PDF Okuyucu

Kaynakça (151)

  1. [1] Wojtaszek H. “Energy transition 2024–2025: New demand vectors, technology oversupply, and shrinking net-zero 2050 premium”. Energies, 18(16), 4441, 2025.
  2. [2] Khaleel M, Yusupov Z. “Advancing sustainable energy transitions: Insights on finance, policy, infrastructure, and demand-side integration”. Unconventional Resources, 9, 100274, 2026.
  3. [3] Schnidrig J, Cherkaoui R, Calisesi Y, Margni M, Maréchal F. “On the role of energy infrastructure in the energy transition. Case study of an energy independent and CO₂ neutral energy system for Switzerland”. Frontiers in Energy Research, 11, 1164813, 2023.
  4. [4] Weidner T, Galán-Martín Á, Ryberg MW, Guillén-Gosálbez G. “Energy systems modeling and optimization for absolute environmental sustainability: current landscape and opportunities”. Computers & Chemical Engineering, 164, 107883, 2022.
  5. [5] Ray P. “Renewable energy and sustainability”. Clean Technologies and Environmental Policy, 21(8), 1517-1533, 2019.
  6. [6] Al-Ali S, Olabi AG, Mahmoud M. “A review of solar photovoltaic technologies: developments, challenges, and future perspectives”. Energy Conversion and Management: X, 27, 101057, 2025.
  7. [7] Lewis NS. “Research opportunities to advance solar energy utilization”. Science, 351(6271), aad1920, 2016.
  8. [8] Grätzel M. “Conversion of sunlight to electric power by nanocrystalline dye-sensitized solar cells”. Journal of Photochemistry and Photobiology A: Chemistry, 164(1-3), 3-14, 2004.
  9. [9] O'Regan B, Grätzel M. “A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO₂ films”. Nature, 353(6346), 737-740, 1991.
  10. [10] Qamar S, Erten Ela S. “Dye-sensitized solar cells (DSSC): Principles, materials and working mechanism”. Current Opinion in Colloid & Interface Science, 74, 101871, 2024.
  11. [11] Sekaran PD, Marimuthu R. “An extensive analysis of dye-sensitized solar cell (DSSC)”. Brazilian Journal of Physics, 54(1), 28, 2024.
  12. [12] Ullah N, Shah SM, Ansir R, Erten-Ela S, Mushtaq S, Zafar S. “Pyrocatechol violet sensitized cadmium and barium doped TiO₂/ZnO nanostructures: As photoanode in DSSC”. Materials Science in Semiconductor Processing, 135, 106119, 2021.
  13. [13] Kokkonen M, Talebi P, Zhou J, Asgari S, Soomro SA, Elsehrawy F, Halme J, Ahmad S, Hagfeldt A, Hashmi SG. “Advanced research trends in dye-sensitized solar cells”. Journal of Materials Chemistry A, 9(17), 10527-10545, 2021.
  14. [14] Barichello J, Mariani P, Vesce L, Spadaro D, Citro I, Matteocci F, Bartolotta A, Di Carlo A, Calogero G. “Bifacial dye-sensitized solar cells for indoor and outdoor renewable energy-based application”. Journal of Materials Chemistry C, 12(7), 2317-2349, 2024.
  15. [15] Sasitharan K, Freitag M. “From zombies to smart devices: The evolution of dye-sensitized solar cells for IoT applications”. ACS Applied Energy Materials, 8(14), 9891-9899, 2025.
  16. [16] Iftikhar H, Sonai GG, Hashmi SG, Nogueira AF, Lund PD. “Progress on electrolytes development in dye-sensitized solar cells”. Materials, 12(12), 1998, 2019.
  17. [17] Sharma K, Sharma V, Sharma SS. “Dye-sensitized solar cells: Fundamentals and current status”. Nanoscale Research Letters, 13(1), 381, 2018.
  18. [18] Sasikumar R, Thirumalaisamy S, Kim B, Hwang B. “Dye-sensitized solar cells: Insights and research divergence towards alternatives”. Renewable and Sustainable Energy Reviews, 199, 114549, 2024.
  19. [19] Mozaffari S, Nateghi MR, Zarandi MB. “An overview of the challenges in the commercialization of dye sensitized solar cells”. Renewable and Sustainable Energy Reviews, 71, 675-686, 2017.
  20. [20] Jiang R, Michaels H, Vlachopoulos N, Freitag M. Beyond the limitations of dye-sensitized solar cells. Editors: Soroush M, Lau KKS. Dye-Sensitized Solar Cells: Mathematical Modelling, and Materials Design and Optimization, 285-323, London, United Kingdom, Academic Press, 2019.
  21. [21] Wei H, Luo JW, Li SS, Wang LW. “Revealing the origin of fast electron transfer in TiO₂-based dye-sensitized solar cells”. Journal of the American Chemical Society, 138(26), 8165-8174, 2016.
  22. [22] Chandiran AK, Abdi-Jalebi M, Nazeeruddin MK, Grätzel M. “Analysis of electron transfer properties of ZnO and TiO₂ photoanodes for dye-sensitized solar cells”. ACS Nano, 8(3), 2261-2268, 2014.
  23. [23] Jennings JR, Ghicov A, Peter LM, Schmuki P, Walker AB. “Dye-sensitized solar cells based on oriented TiO₂ nanotube arrays: Transport, trapping, and transfer of electrons”. Journal of the American Chemical Society, 130(40), 13364-13372, 2008.
  24. [24] Tomar N, Agrawal A, Dhaka VS, Surolia PK. “Ruthenium complexes based dye sensitized solar cells: Fundamentals and research trends”. Solar Energy, 207, 59-76, 2020.
  25. [25] Koops SE, O'Regan BC, Barnes PRF, Durrant JR. “Parameters influencing the efficiency of electron injection in dye-sensitized solar cells”. Journal of the American Chemical Society, 131(13), 4808-4818, 2009.
  26. [26] Sadia SI, Shishir MKH, Ahmed S, Aidid AR, Islam MM, Rana MM, Al-Reza SM, Alam MA. “Crystallographic biography on nanocrystalline phase of polymorphs titanium dioxide (TiO₂): A perspective static review”. South African Journal of Chemical Engineering, 50(1), 51-64, 2024.
  27. [27] Messemeche R, Saidi H, Attaf A, Benkhetta Y, Chala S, Azizi R, Nouadji R. “Elaboration and characterization of nano-crystalline layers of transparent titanium dioxide (anatase TiO₂) deposited by a sol-gel (spin coating) process”. Surfaces and Interfaces, 19, 100482, 2020.
  28. [28] Kaur G, Negi P, Konwar RJ, Kumar H, Devi N, Kaur G, Himani, Kaur M, Sharma R, Sati PC, Kumar V, Sharma P, Singh JP, Yadav AN. “Tailored TiO₂ nanostructures for designing of highly efficient dye-sensitized solar cells: A review”. Nano-Structures & Nano-Objects, 36, 101056, 2023.
  29. [29] Roy-Mayhew JD, Bozym DJ, Punckt C, Aksay IA. “Functionalized graphene as a catalytic counter electrode in dye-sensitized solar cells”. ACS Nano, 4(10), 6203-6211, 2010.
  30. [30] Wang X, Zhi L, Müllen K. “Transparent, conductive graphene electrodes for dye-sensitized solar cells”. Nano Letters, 8(1), 323-327, 2008.
  31. [31] Wang H, Hu YH. “Graphene as a counter electrode material for dye-sensitized solar cells”. Energy & Environmental Science, 5(8), 8182-8188, 2012.
  32. [32] Sen A, Putra MH, Biswas AK, Behera AK, Groß A. “Insight on the choice of sensitizers/dyes for dye sensitized solar cells: A review”. Dyes and Pigments, 213, 111087, 2023.
  33. [33] Muhammad I, Ibrahim H, Sallau MS, Garba ZN, Erten Ela S. “Novel fullerene-based dyes for solar cell applications: Insights from density functional theory and time-dependent density functional theory investigations”. Scientific Research Communications, 5(1), 28-38, 2025.
  34. [34] Zhang L, Cole JM. “Anchoring groups for dye-sensitized solar cells”. ACS Applied Materials & Interfaces, 7(6), 3427-3455, 2015.
  35. [35] Clifford JN, Martínez-Ferrero E, Viterisi A, Palomares E. “Sensitizer molecular structure-device efficiency relationship in dye sensitized solar cells”. Chemical Society Reviews, 40(3), 1635-1646, 2011.
  36. [36] Iswarya S, Dharshini A, Vithiya BSM, Prasad TAA. “Evolving smart homes to exploring space, dye-sensitized solar cells (DSSC) as a sustainable energy model for the future world-A review”. Next Energy, 8, 100328, 2025.
  37. [37] Kananke Udubokke Rathnayakage RSR, Bandara TMWJ, Wijayaratne K, Kumara GRA, de Silva LA, Tennakone K. “Fluorine-doped tin oxide thin films with high surface conductance and low transparency for boosting performance in dye-sensitized solar cell applications”. ACS Applied Energy Materials, 6(16), 8336-8348, 2023.
  38. [38] Lee SH, Han SH, Jung HS, Shin H, Lee J, Noh JH, Lee S, Cho IS, Lee JK, Kim J, Shin H. “Al-doped ZnO thin film: A new transparent conducting layer for ZnO nanowire-based dye-sensitized solar cells”. The Journal of Physical Chemistry C, 114(15), 7185-7189, 2010.
  39. [39] Nizamudeen C, Krishnapriya R, Mozumder MS, Mourad AHI, Ramachandran T. “Photovoltaic performance of MOF-derived transition metal doped titania-based photoanodes for DSSCs”. Scientific Reports, 13(1), 6345, 2023.
  40. [40] Mohammadian-Sarcheshmeh H, Arazi R, Mazloum-Ardakani M. “Application of bifunctional photoanode materials in DSSCs: A review”. Renewable and Sustainable Energy Reviews, 134, 110249, 2020.
  41. [41] Niu H, Yao X, Luo S, Xie Y, Li T, Chen W, Wan L, Wang H, Zhou R, Du Y, Hu L, Xu J. “Combination of multiple routes to enhance DSSC performance: Flower-like structure of SnO₂ as photoanode and modification with Ag nanoparticle”. Materials Science in Semiconductor Processing, 177, 108363, 2024.
  42. [42] Ashrafuzzaman Md, Kalam A, Al-Sehemi AG, Yadav P, Dubey M. “A review of photoanode materials, challenges, and outlook of dye-sensitized solar cells”. Journal of Power Sources, 638, 236636, 2025.
  43. [43] Kakiage K, Aoyama Y, Yano T, Oya K, Fujisawa J-i, Hanaya M. “Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes”. Chemical Communications, 51(88), 15894-15897, 2015.
  44. [44] El-Zohry AM, Zietz B. “Electron dynamics in dye-sensitized solar cells influenced by dye-electrolyte complexation”. The Journal of Physical Chemistry C, 124(30), 16300-16307, 2020.
  45. [45] Korir BK, Kibet JK, Ngari SM. “A review on the current status of dye-sensitized solar cells: Toward sustainable energy”. Energy Science & Engineering, 12(8), 3188-3226, 2024.
  46. [46] Masud, Kim HK. “Redox shuttle-based electrolytes for dye-sensitized solar cells: Comprehensive guidance, recent progress, and future perspective”. ACS Omega, 8(7), 6139-6163, 2023.
  47. [47] Ahmad K, Javed AH, Shahzad N, Shahzad MI, Khan ZS, Iqbal N, Qammar M, Sacco A, Pugliese D. “Influence of cobalt redox couple concentration on the characteristics of liquid and quasi-solid electrolytes and on the photovoltaic parameters of dye-sensitised solar cells”. Applied Physics A, 131(3), 170, 2025.
  48. [48] Ibrayeva A, Imanbekova Z, Abibulla U, Tashenov Y, Baptayev B, Balanay MP. “Enhancing the stability and efficiency of dye-sensitized solar cells with MIL-125 metal-organic framework as an electrolyte additive”. Scientific Reports, 15(1), 5883, 2025.
  49. [49] Prajapat K, Mahajan U, Kumar A, Dhonde M, Sahu K, Vyas S, Riyad YM, El-Bahy ZM. “Next-generation counter electrodes for dye-sensitized solar cells: A comprehensive overview”. Sustainable Materials and Technologies, 42, e01178, 2024.
  50. [50] Alizadeh A, Roudgar-Amoli M, Bonyad-Shekalgourabi SM, Shariatinia Z, Mahmoudi M, Saadat F. “Dye sensitized solar cells go beyond using perovskite and spinel inorganic materials: A review”. Renewable and Sustainable Energy Reviews, 157, 112047, 2022.
  51. [51] Maurya IC, Singh S, Senapati S, Srivastava P, Bahadur L. “Green synthesis of TiO₂ nanoparticles using Bixa orellana seed extract and its application for solar cells”. Solar Energy, 194, 952-958, 2019.
  52. [52] Ishak NN, Mohamed Ali MS, Bsoul A. “Nanostructured materials for highly efficient dye-sensitized solar cells: A review”. Advanced Materials Technologies, 10(11), 2401519, 2025.
  53. [53] Ding Y, Zhou L, Mo L, Jiang L, Hu L, Li Z, Chen S, Dai S. “TiO₂ microspheres with controllable surface area and porosity for enhanced light harvesting and electrolyte diffusion in dye-sensitized solar cells”. Advanced Functional Materials, 25(37), 5946-5953, 2015.
  54. [54] Umale S, Sudhakar V, Sontakke SM, Krishnamoorthy K, Pandit AB. “Improved efficiency of DSSC using combustion synthesized TiO₂”. Materials Research Bulletin, 109, 222-226, 2019.
  55. [55] Liu H, Yu L, Chen W, Li Y. “The progress of TiO₂ nanocrystals doped with rare earth ions”. Journal of Nanomaterials, 2012, 235879, 2012.
  56. [56] Misra KP, Kumawat A, Bandopadhyay A, Modak B, Mukherjee SK, Babu PD, Kabi S, Chattopadhyay S, Misra RDK. “Structural analysis and magnetic properties of cobalt-doped nanotitania”. Materials Science and Engineering: B, 282, 115761, 2022.
  57. [57] Basu K, Benetti D, Zhao H, Jin L, Vetrone F, Vomiero A, Rosei F. “Enhanced photovoltaic properties in dye sensitized solar cells by surface treatment of SnO₂ photoanodes”. Scientific Reports, 6, 23312, 2016.
  58. [58] Kaya E, Gencer Imer A, Gülcan M. “Metal organic framework (MOF-5) and graphene oxide (GO) derived photoanodes for an efficient dye-sensitized solar cells”. Journal of Power Sources, 626, 235811, 2025.
  59. [59] Ngidi NPD, Muchuweni E, Nyamori VO. “Synthesis and characterisation of heteroatom-doped reduced graphene oxide/bismuth oxide nanocomposites and their application as photoanodes in DSSCs”. RSC Advances, 12(4), 2462-2472, 2022.
  60. [60] Lin Y-S, Chen W-H. “Dye-sensitized solar cells with modified TiO₂ scattering layer produced by hydrothermal method”. Materials, 18(2), 278, 2025.
  61. [61] Bhojanaa KB, Soundarya Mary A, Shalini Devi KS, Pavithra N, Pandikumar A. “Account of structural, theoretical, and photovoltaic properties of ABO₃ oxide perovskites photoanode-based dye-sensitized solar cells”. Solar RRL, 6(2), 2100792, 2022.
  62. [62] Ebenezer Anitha A, Dotter M. “A review on liquid electrolyte stability issues for commercialization of dye-sensitized solar cells (DSSC)”. Energies, 16(13), 5129, 2023.
  63. [63] Yum J-H, Chen P, Grätzel M, Nazeeruddin MK. “Recent developments in solid-state dye-sensitized solar cells”. ChemSusChem, 1(8-9), 699-707, 2008.
  64. [64] Schmidt-Mende L, Bach U, Humphry-Baker R, Horiuchi T, Miura H, Ito S, Uchida S, Grätzel M. “Organic dye for highly efficient solid-state dye-sensitized solar cells”. Advanced Materials, 17(7), 813-815, 2005.
  65. [65] Cao Y, Saygili Y, Ummadisingu A, Teuscher J, Luo J, Pellet N, Giordano F, Zakeeruddin SM, Moser JE, Freitag M, Hagfeldt A, Grätzel M. “11% efficiency solid-state dye-sensitized solar cells with copper(II/I) hole transport materials”. Nature Communications, 8, 15390, 2017.
  66. [66] Chung I, Lee B, He J, Chang RPH, Kanatzidis MG. “All-solid-state dye-sensitized solar cells with high efficiency”. Nature, 485(7399), 486-489, 2012.
  67. [67] Wang H, Zhang X, Gong F, Zhou G, Wang Z-S. “Novel ester-functionalized solid-state electrolyte for highly efficient all-solid-state dye-sensitized solar cells”. Advanced Materials, 24(1), 121-124, 2012.
  68. [68] Xu C, Wu J, Desai UV, Gao D. “High-efficiency solid-state dye-sensitized solar cells based on TiO₂-coated ZnO nanowire arrays”. Nano Letters, 12(5), 2420-2424, 2012.
  69. [69] Wu J, Hao S, Lan Z, Lin J, Huang M, Huang Y, Li P, Yin S, Sato T. “An all-solid-state dye-sensitized solar cell-based poly(N-alkyl-4-vinyl-pyridine iodide) electrolyte with efficiency of 5.64%”. Journal of the American Chemical Society, 130(35), 11568-11569, 2008.
  70. [70] Zhou J, Wang C, Zhang X, Luo J, Ji J, Wu Y, Tan S. “All-solid-state polymer electrolyte with efficiency and stability superior to its smectic precursor for photoelectrochemical devices”. Industrial & Engineering Chemistry Research, 60(47), 17083-17090, 2021.
  71. [71] Zhou J, Li X, Wang C, Tian W, Ji J, Wu Y, Tan S. “In-situ construction of dual-physical-network within ionic liquid crystals in photoelectrochemical devices for enhancing mechanical strength and charge transport as efficient solid-state electrolytes”. Chemical Engineering Science, 248, 117239, 2022.
  72. [72] Wang N, Hu J, Gao L, Ma T. “Current progress in solid-state electrolytes for dye-sensitized solar cells: A mini-review”. Journal of Electronic Materials, 49(12), 7085-7097, 2020.
  73. [73] Karakuş MÖ, Yakışıklıer ME, Delibaş A, Ayyıldız E, Çetin H. “Anionic and cationic polymer-based quasi-solid-state dye-sensitized solar cell with poly(aniline) counter electrode”. Solar Energy, 195, 565-572, 2020.
  74. [74] Manafi P, Nazockdast H, Karimi M, Sadighi M, Magagnin L. “A study on the microstructural development of gel polymer electrolytes and different imidazolium-based ionic liquids for dye-sensitized solar cells”. Journal of Power Sources, 481, 228622, 2021.
  75. [75] Wen J, Sun Z, Qiao Y, Zhou Y, Liu Y, Zhang Q, Liu Y, Jiao S. “Ti₃C₂ MXene-reduced graphene oxide composite polymer-based printable electrolyte for quasi-solid-state dye-sensitized solar cells”. ACS Applied Energy Materials, 5(3), 3329-3338, 2022.
  76. [76] Chalkias DA, Verykokkos NE, Kollia E, Petala A, Kostopoulos V, Papanicolaou GC. “High-efficiency quasi-solid state dye-sensitized solar cells using a polymer blend electrolyte with polymer-in-salt conduction characteristics”. Solar Energy, 222, 35-47, 2021.
  77. [77] Yu Z, Vlachopoulos N, Gorlov M, Kloo L. “Liquid electrolytes for dye-sensitized solar cells”. Dalton Transactions, 40(40), 10289-10303, 2011.
  78. [78] Duong DMT, Danh EH, Nguyen D, Hoang VH, Doan Nguyen TT, Yeh CY, Nguyen PT. “Deep-eutectic-solvent electrolytes comprising 1-ethyl-3-methylimidazolium iodide, iodine, and urea for dye-sensitized solar cells”. Journal of Molecular Liquids, 423, 127014, 2025.
  79. [79] Li D, Qin D, Deng M, Luo Y, Meng Q. “Optimization the solid-state electrolytes for dye-sensitized solar cells”. Energy & Environmental Science, 2(3), 283-291, 2009.
  80. [80] Mahmood A. “Recent research progress on quasi-solid-state electrolytes for dye-sensitized solar cells”. Journal of Energy Chemistry, 24(6), 686-692, 2015.
  81. [81] Guan S, Cao M, Jiao S, Ma R, Xi R, Hu C, Hao Y, Han L, Liu R, Sun Z. “Dye-sensitized solar cells with quasi-solid-state electrolytes based on freeze-dried hydrogel porous structures”. ChemistrySelect, 10(20), e01854, 2025.
  82. [82] González-Verjan VA, Trujillo-Navarrete B, Félix-Navarro RM, de León JND, Romo-Herrera JM, Calva-Yáñez JC, Hernández-Lizalde JM, Reynoso-Soto EA. “Effect of TiO₂ particle and pore size on DSSC efficiency”. Materials for Renewable and Sustainable Energy, 9, 13, 2020.
  83. [83] Ge Z, Wang C, Chen Z, Wang T, Chen T, Shi R, Yu S, Liu J. “Investigation of the TiO₂ nanoparticles aggregation with high light harvesting for high-efficiency dye-sensitized solar cells”. Materials Research Bulletin, 135, 111148, 2021.
  84. [84] Joshi DN, Pal AK, Krishnapriya R, Arun Prasath R. “Submicron-scale Au-decorated TiO₂ mesoporous spheres for enhanced photon harvesting in DSSCs through near-field enhancement, light scattering, and dye loading”. Frontiers in Materials, 11, 1457325, 2024.
  85. [85] Hwang D-K, Kim J-H, Kim K-P, Sung S-J. “Mesoporous TiO₂ hierarchical structures: preparation and efficacy in solar cells”. RSC Advances, 7, 49057-49065, 2017.
  86. [86] Weintraub B, Wei Y, Wang ZL. “Optical fiber/nanowire hybrid structures for efficient three-dimensional dye-sensitized solar cells”. Angewandte Chemie International Edition, 48(47), 8981-8985, 2009.
  87. [87] Mandal MK, Ranjan R, Ghosh S, Chakraborty J. “The role of masking and aperture size for accurate measurement of performance parameters of DSSCs”. Solar Energy, 285, 113116, 2025.
  88. [88] Rehman AU, Ullah N, Saeed MA, Khalil UK. “Enhanced absorption performance of dye-sensitized solar cell with composite materials and bilayer structure of nanorods and nanospheres”. Metals, 12(5), 852, 2022.
  89. [89] Erten-Ela S. “Photovoltaic performance of ZnO nanorod and ZnO:CdO nanocomposite layers in dye-sensitized solar cells (DSSCs)”. International Journal of Photoenergy, 2013, 436831, 2013.
  90. [90] Baruah S, Afre RA, Pugliese D. “Effect of size and morphology of different ZnO nanostructures on the performance of dye-sensitized solar cells”. Energies, 17(9), 2076, 2024.
  91. [91] Ding M, Guo Z, Zhou L, Fang X, Zhang L, Zeng L, Xie L, Zhao H. “One-dimensional zinc oxide nanomaterials for application in high-performance advanced optoelectronic devices”. Crystals, 8(5), 223, 2018.
  92. [92] Srivastava KV, Srivastava P, Srivastava A, Maurya RK, Singh YP, Srivastava A. “1D TiO₂ photoanodes: A game-changer for high-efficiency dye-sensitized solar cells”. RSC Advances, 15, 4789-4819, 2025.
  93. [93] Nandi P, Das D. “Morphological variations of ZnO nanostructures and its influence on the photovoltaic performance when used as photoanodes in dye sensitized solar cells”. Solar Energy Materials and Solar Cells, 243, 111811, 2022.
  94. [94] Tian H. “Solid-state p-type dye-sensitized solar cells: Progress, potential applications and challenges”. Sustainable Energy & Fuels, 3(4), 888-898, 2019.
  95. [95] Qu J, Fan Z, Mira H, Wang J, Abdelkader AM, Ding S. “Hierarchical NiO/CMK-3 photocathode for a p-type dye-sensitized solar cell with improved photoelectrochemical performance and fast hole transfer”. Molecules, 25(7), 1638, 2020.
  96. [96] Piccinin S, Rocca D, Pastore M. “Role of solvent in the energy level alignment of dye-sensitized NiO interfaces”. The Journal of Physical Chemistry C, 121(40), 22286-22294, 2017.
  97. [97] Favereau L, Pellegrin Y, Hirsch L, Renaud A, Planchat A, Blart E, Louarn G, Cario L, Jobic S, Boujtita M, Odobel F. “Engineering processes at the interface of p-semiconductor for enhancing the open-circuit voltage in p-type dye-sensitized solar cells”. Advanced Energy Materials, 7(12), 1601776, 2017.
  98. [98] Daoud A, Cheknane A, Meftah A, Nunzi JM, Shalabi M, Hilal HS. “Spatial separation strategies to control charge recombination and dye regeneration in p-type dye sensitized solar cells”. Solar Energy, 236, 107-152, 2022.
  99. [99] Liu Q, Wei L, Yuan S, Ren X, Zhao Y, Wang Z, Zhang M, Shi L, Li D, Li A. “Influence of interface properties on charge density, band edge shifts and kinetics of the photoelectrochemical process in p-type NiO photocathodes”. RSC Advances, 5(88), 71778-71784, 2015.
  100. [100] Li X, Yu F, Stappert S, Li C, Zhou Y, Yu Y, Li X, Ågren H, Hua J, Tian H. “Enhanced photocurrent density by spin-coated NiO photocathodes for N-annulated perylene-based p-type dye-sensitized solar cells”. ACS Applied Materials & Interfaces, 8(30), 19393-19401, 2016.
  101. [101] Bonomo M, Di Carlo A, Centore R, Dini D, Carella A. “New pyran-based dyes as efficient sensitizers of p-type dye-sensitized solar cells”. Solar Energy, 169, 237-241, 2018.
  102. [102] Kusama H. “Interaction between dyes and iodide mediators in p-type dye-sensitized solar cells”. Journal of Photochemistry and Photobiology A: Chemistry, 357, 60-71, 2018.
  103. [103] Listorti A, O'Regan B, Durrant JR. “Electron transfer dynamics in dye-sensitized solar cells”. Chemistry of Materials, 23(15), 3381-3399, 2011.
  104. [104] Jeon J, Goddard WA III, Kim H. “Inner-sphere electron-transfer single iodide mechanism for dye regeneration in dye-sensitized solar cells”. Journal of the American Chemical Society, 135(7), 2431-2434, 2013.
  105. [105] Nattestad A, Mozer AJ, Fischer MKR, Cheng YB, Mishra A, Bäuerle P, Bach U. “Highly efficient photocathodes for dye-sensitized tandem solar cells”. Nature Materials, 9(1), 31-35, 2010.
  106. [106] Brands MB, Lugier OCM, Zhu K, Huijser A, Tanase S, Reek JNH. “Slow hole diffusion limits the efficiency of p-type dye-sensitized solar cells based on the P1 dye”. Energy Advances, 3(8), 2035-2041, 2024.
  107. [107] Huang Z, Natu G, Ji Z, He M, Yu M, Wu Y. “Probing the low fill factor of NiO p-type dye-sensitized solar cells”. The Journal of Physical Chemistry C, 116(50), 26239-26246, 2012.
  108. [108] Huang Z, Natu G, Ji Z, Hasin P, Wu Y. “p-Type dye-sensitized NiO solar cells: A study by electrochemical impedance spectroscopy”. The Journal of Physical Chemistry C, 115(50), 25109-25114, 2011.
  109. [109] Cavallo C, Di Pascasio F, Latini A, Bonomo M, Dini D. “Nanostructured semiconductor materials for dye-sensitized solar cells”. Journal of Nanomaterials, 2017, 5323164, 2017.
  110. [110] Vajda M, Ursu D, Duteanu N, Miclau M. “Low lying valence band edge materials based on copper oxide for tandem dye-sensitized solar cells”. Materials Letters, 275, 128151, 2020.
  111. [111] Narayanasamy P, Chidambaram SG, Mahendran M, Panda SK, Balasubramanian S. “Fabrication of copper-niobium-oxygen complexes as a photocathode for p-type dye-sensitized solar cells”. International Journal of Energy Research, 45(13), 19623-19633, 2021.
  112. [112] D'Amario L, Antila LJ, Pettersson Rimgard B, Boschloo G, Hammarström L. “Kinetic evidence of two pathways for charge recombination in NiO-based dye-sensitized solar cells”. The Journal of Physical Chemistry Letters, 6(5), 779-783, 2015.
  113. [113] Daeneke T, Yu Z, Lee GP, Fu D, Duffy NW, Makuta S, Tachibana Y, Spiccia L, Mishra A, Bäuerle P, Bach U. “Dominating energy losses in NiO p-type dye-sensitized solar cells”. Advanced Energy Materials, 5(4), 1401387, 2015.
  114. [114] Ibrayeva A, Abibulla U, Imanbekova Z, Baptayev B, O'Reilly RJ, Balanay MP. “Advancements in carbazole-based sensitizers and hole-transport materials for enhanced photovoltaic performance”. Molecules, 29(21), 5035, 2024.
  115. [115] Segalina A, Lebègue S, Rocca D, Piccinin S, Pastore M. “Structure and energetics of dye-sensitized NiO interfaces in water from ab initio molecular dynamics and large-scale GW calculations”. Journal of Chemical Theory and Computation, 17(8), 5225-5238, 2021.
  116. [116] Potts NTZ, Sloboda T, Wächtler M, Wahyuono RA, D'Annibale V, Dietzek B, Cappel UB, Gibson EA. “Probing the dye-semiconductor interface in dye-sensitized NiO solar cells”. The Journal of Chemical Physics, 153(18), 184704, 2020.
  117. [117] Dürr M, Bamedi A, Yasuda A, Nelles G. “Tandem dye-sensitized solar cell for improved power conversion efficiencies”. Applied Physics Letters, 84(17), 3397-3399, 2004.
  118. [118] Alessa H, Wijayantha KGU. “A very simple flexible tandem dye-sensitized solar cell”. Journal of Umm Al-Qura University for Applied Sciences, 10, 698-706, 2024.
  119. [119] Badawy SA, Abdel-Latif E, Elmorsy MR. “Tandem dye-sensitized solar cells achieve 12.89% efficiency using novel organic sensitizers”. Scientific Reports, 14, 26072, 2024.
  120. [120] Mounika PM, Ambapuram M, Maddala G, Kalvapalli S, Ganesha MK, Singh AK, Thota N, Rajesh MN, Giribabu L, Venkateswarlu K, Mitty R. “Unveiling a new frontier in efficient solar power conversion with a pioneering bifacial tandem dye-sensitized solar cell”. ACS Applied Electronic Materials, 5(10), 5661-5667, 2023.
  121. [121] Jia H-L, Huang M-Z, Peng Z-J, Wang D-M, Zhang G-H, Guan M-Y. “A supramolecular assembly of metal-free organic dye with zinc porphyrin chromophore for dye-sensitized solar cells”. Dalton Transactions, 46(43), 15124-15129, 2017.
  122. [122] Liu L, Najar A, Wang K, Du M, Liu S. “Perovskite quantum dots in solar cells”. Advanced Science, 9(7), 2104577, 2022.
  123. [123] Han J, Yin X, Nan H, Zhou Y, Yao Z, Li J, Oron D, Lin H. “Enhancing the performance of perovskite solar cells by hybridizing SnS quantum dots with CH₃NH₃PbI₃”. Small, 13(32), 1700953, 2017.
  124. [124] Han J, Luo S, Yin X, Zhou Y, Nan H, Li J, Li X, Oron D, Shen H, Lin H. “Hybrid PbS quantum-dot-in-perovskite for high-efficiency perovskite solar cell”. Small, 14(31), 1801016, 2018.
  125. [125] Najafi L, Taheri B, Martín-García B, Bellani S, Di Girolamo D, Agresti A, Oropesa-Nuñez R, Pescetelli S, Vesce L, Calabrò E, Prato M, Del Rio Castillo AE, Di Carlo A, Bonaccorso F. “MoS₂ quantum dot/graphene hybrids for advanced interface engineering of a CH₃NH₃PbI₃ perovskite solar cell with an efficiency of over 20%”. ACS Nano, 12(11), 10736-10754, 2018.
  126. [126] Ngidi NPD, Muchuweni E, Nyamori VO. “Enhanced performance by heteroatom-doped reduced graphene oxide-TiO₂-based nanocomposites as photoanodes in dye-sensitized solar cells”. International Journal of Energy Research, 46(10), 13670-13686, 2022.
  127. [127] Al-Fatlawe BA, Al-Temimei FA. “Optimizing electronic and photovoltaic properties of D–π–A organic dyes for DSSCs using density functional theory”. Journal of Fluorescence, 35(9), 7833-7845, 2025.
  128. [128] Yum J-H, Jang S-R, Walter P, Geiger T, Nüesch F, Kim S, Ko J, Grätzel M, Nazeeruddin MK. “Efficient co-sensitization of nanocrystalline TiO₂ films by organic sensitizers”. Chemical Communications, (44), 4680-4682, 2007.
  129. [129] Sharma GD, Daphnomili D, Gupta KSV, Gayathri T, Singh SP, Angaridis PA, Kitsopoulos TN, Tasis D, Coutsolelos AG. “Enhancement of power conversion efficiency of dye-sensitized solar cells by co-sensitization of zinc-porphyrin and thiocyanate-free ruthenium(II)-terpyridine dyes and graphene modified TiO₂ photoanode”. RSC Advances, 3, 22412-22420, 2013.
  130. [130] Liu GM, Jaegermann W, He J, Sundström V, Sun LC. “XPS and UPS characterization of the TiO₂/ZnPcGly heterointerface: Alignment of energy levels”. The Journal of Physical Chemistry B, 106(23), 5814-5819, 2002.
  131. [131] Hagberg DP, Marinado T, Karlsson KM, Nonomura K, Qin P, Boschloo G, Brinck T, Hagfeldt A, Sun L. “Tuning the HOMO and LUMO energy levels of organic chromophores for dye sensitized solar cells”. The Journal of Organic Chemistry, 72(25), 9550-9556, 2007.
  132. [132] Cheng M, Yang X, Zhang F, Zhao J, Sun L. “Tuning the HOMO and LUMO energy levels of organic dyes with N-carboxomethylpyridinium as acceptor to optimize the efficiency of dye-sensitized solar cells”. The Journal of Physical Chemistry C, 117(18), 9076-9083, 2013.
  133. [133] Kitai A. p-n Junction Solar Cells. Principles of Solar Cells, LEDs and Related Devices: The Role of the PN Junction,2nd ed, Hoboken, USA, John Wiley & Sons, 2018.
  134. [134] Tarng ML, Pankove JI. “Passivation of p-n junction in crystalline silicon by amorphous silicon”. IEEE Transactions on Electron Devices, ED-26(11), 1728-1734, 1979.
  135. [135] Jiang C-S, Yang M, Zhou Y, To B, Nanayakkara SU, Luther JM, Zhou W, Berry JJ, van de Lagemaat J, Padture NP, Zhu K, Al-Jassim MM. “Carrier separation and transport in perovskite solar cells studied by nanometre-scale profiling of electrical potential”. Nature Communications, 6, 8397, 2015.
  136. [136] Muñoz-García AB, Benesperi I, Boschloo G, Concepcion JJ, Delcamp JH, Gibson EA, Meyer GJ, Pavone M, Pettersson H, Hagfeldt A, Freitag M. “Dye-sensitized solar cells strike back”. Chemical Society Reviews, 50(22), 12450-12550, 2021.
  137. [137] Ru X, Yang M, Yin S, Wang Y, Hong C, Peng F, Yuan Y, Sun C, Xue C, Qu M, Wang J, Lu J, Fang L, Deng H, Xie T, Liu S, Li Z, Xu X. “Silicon heterojunction solar cells achieving 26.6% efficiency on commercial-size p-type silicon wafer”. Joule, 8(4), 1092-1104, 2024.
  138. [138] Ramanujam J, Bishop DM, Todorov TK, Gunawan O, Rath J, Nekovei R, Artegiani E, Romeo A. “Flexible CIGS, CdTe and a-Si:H based thin film solar cells: A review”. Progress in Materials Science, 110, 100619, 2020.
  139. [139] Bechir MB, Almeshal A, Dhaou MH. “Structural evolution, dielectric relaxation, and charge transport characteristics of formamidinium lead iodide (FAPbI₃) perovskite”. Materials Research Bulletin, 157, 112012, 2023.
  140. [140] Baskoro F, Wong HQ, Yen H-J. “Strategic structural design of a gel polymer electrolyte toward a high efficiency lithium-ion battery”. ACS Applied Energy Materials, 2(6), 3937-3971, 2019.
  141. [141] Lim SJ, Kang YS, Kim D-W. “Photovoltaic performance of dye-sensitized solar cells assembled by in-situ chemical cross-linking”. Electrochemistry Communications, 12(8), 1037-1040, 2010.
  142. [142] Grifoni F, Bonomo M, Naim W, Barbero N, Alnasser T, Dzeba I, Giordano M, Tsaturyan A, Urbani M, Torres T, Barolo C, Sauvage F. “Toward sustainable, colorless, and transparent photovoltaics: State of the art and perspectives for the development of selective near-infrared dye-sensitized solar cells”. Advanced Energy Materials, 11(43), 2101598, 2021.
  143. [143] D'Amico F, de Jong B, Bartolini M, Franchi D, Dessì A, Zani L, Yzeiri X, Gatto E, Santucci A, Di Carlo A, Reginato G, Cinà L, Vesce L. “Recent advances in organic dyes for application in dye-sensitized solar cells under indoor lighting conditions”. Materials, 16(23), 7338, 2023.
  144. [144] Yun MJ, Sim YH, Cha SI, Seo SH, Lee DY. “Three-dimensional textile platform for electrochemical devices and its application to dye-sensitized solar cells”. Scientific Reports, 9, 2322, 2019.
  145. [145] Cellura M, Luu LQ, Guarino F, Longo S. “A review on life cycle environmental impacts of emerging solar cells”. Science of the Total Environment, 908, 168019, 2024.
  146. [146] Venkatesan S, Lin W-H, Teng H, Lee Y-L. “High-efficiency bifacial dye-sensitized solar cells for application under indoor light conditions”. ACS Applied Materials & Interfaces, 11(45), 42780-42789, 2019.
  147. [147] Rahmatian M, Sayyaadi H, Ameri M. “Indoor photovoltaics: A numerical model of dye-sensitized solar cells based on indoor illumination for the Internet of Things applications”. Energy Conversion and Management: X, 22, 100606, 2024.
  148. [148] Devadiga D, Selvakumar M, Shetty P, Santosh MS. “Dye-sensitized solar cell for indoor applications: A mini-review”. Journal of Electronic Materials, 50(6), 3187-3206, 2021.
  149. [149] Tsai MC, Wang C-L, Chang C-W, Hsu CW, Hsiao Y-H, Liu C-L, Wang C-C, Lin S-Y, Lin C-Y. “A large, ultra-black, efficient and cost-effective dye-sensitized solar module approaching 12% overall efficiency under 1000 lux indoor light”. Journal of Materials Chemistry A, 6, 1995-2003, 2018.
  150. [150] Kim JH, Kim D-H, So JH, Koo HJ. “Toward eco-friendly dye-sensitized solar cells (DSSCs): Natural dyes and aqueous electrolytes”. Energies, 15(1), 219, 2022.
  151. [151] Cavinato LM, Fresta E, Ferrara S, Costa RD. “Merging biology and photovoltaics: How nature helps sun-catching”. Advanced Energy Materials, 11(43), 2100520, 2021.