Dergiler / Gazi Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2001 / Cilt: 14 - Sayı: 3
İklim şartlarının dış cephe verniklerine etkisi
- Sayfa
- 697–708
- DOI
- —
Özet
Ağaç malzemenin harici etkenlere karşı dayanımını arttırmak için korunması gerekir. Ahşap yüzeyinde koruyucu katman oluşturma, önemli koruma yöntemlerinden biridir. Bu araştırmada kullanılan deneme örnekleri sarıçamdan (Pinus sylvestris L.) hazırlanmıştır. Numune yüzeylerine önce ahşap koruyucu (Pinoteks) ve bir emprenye maddesi olan Immersol WR-2000 uygulanmıştır. Daha sonra koruyucu katman için farklı kalınlıklarda, sentetik esaslı ithal vernik (Hicson Decor) ve yerli üretim sentetik vernik (yat) uygulanmıştır. Denemeler Ankara'da yapılmıştır. Vernikli numuneler 45° açıyla ve yüzleri güneye bakacak şekilde 12 ay süre incelemeye alınmıştır. Test değerlendirmesi, gözlemle ve katman sertlikleri ile parlaklıklarının belirlenmesi şeklinde yapılmıştır. Araştırma sonuçlarına göre, sentetik verniğin sertliğinde, Imersol WR-2000 ile emprenye edilmiş numunelere uygulanmış Hicson Decor verniğin parlaklığında artış görülmüştür.
Abstract
Wooden material should be preservative for improving its durability against outdoor effects. One of the important method could be establish varnish coating on the wood surface. In this research test panels were prepared with using pine wood (Pinus sylvestris L.). First all of the surfaces purpose of improving the durability of against outer effect, wood preservative (Pinoteks) and Imersol WR-2000 which is impregnation material was applied. After that synthetic (Marine) and synthetic based (Hicson Decor) commercial varnishes considering different thickness was applied on panels for protective varnish layers. Experiments was conducted in Ankara. Samples have been under observation for 12 months with facing south at angle 45°. Tests evaluation have done based on observation and defmation of hardness and brighthness of varnish coating. Test result showed that, hardness of synthetic varnish and brigthness of Hicson Decor varnish on the impregnated surfaces with Imersol WR-2000 have increased.