Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2026 / Cilt: 32 Sayı: 5
Effects of STATCOM device on power systems
- Pages
- 935–947
- Publication Date
- 2026-01-06
Abstract
Voltage stability is very important in electrical systems. The voltage and stability of the system can be significantly impacted by reactive power flows. Static Synchronous Compensator (STATCOM) is one of the converter-based Flexible Alternating Current Transmission Systems (FACTS) devices used for reactive power compensation. In this study, a voltage regulation simulation was carried out via STATCOM in a 400 kV and 2*12 MVAr power system located in Kiziltepe District of Mardin Province, which is a joint project of TUBITAK (The Scientific and Technological Research Council of Turkiye) Marmara Research Center Energy Institute and TEIAS (Turkish Electricity Transmission Corporation) 16th Regional Directorate. The bus voltage from the distribution bus of a power transmission system was controlled by the STATCOM despite the changes in the load. Firstly, the working principle of STATCOM was examined, then STATCOM was installed on the distribution bus of a power transmission system located in Kiziltepe District of Mardin Province and its simulation was performed in the MATLAB program. As a result of the simulation, it was observed that STATCOM keeps the busbar voltage at the desired values, provides fast reactive compensation against load changes and increases the voltage stability of the system.
Özet
Gerilim kararlılığı elektrik sistemlerinde çok önemlidir. Sistemin voltajı ve kararlılığı, reaktif güç akışları tarafından önemli ölçüde etkilenebilir. Statik Senkron Kompansatör (STATCOM), reaktif güç kompanzasyonu için kullanılan dönüştürücü tabanlı Esnek Alternatif Akım İletim Sistemleri (FACTS) cihazlarından biridir. Bu çalışmada, TÜBİTAK Marmara Araştırma Merkezi Enstitüsü ile TEİAŞ 16. Bölge Müdürlüğünün ortak projesi olan, Mardin İli Kızıltepe İlçesi'nde bulunan 400 kV ve 2*12 MVAr gücündeki bir enerji sisteminde STATCOM aracılığıyla gerilim düzenleme simülasyonu gerçekleştirilmiştir. Bir enerji iletim sisteminin dağıtım baralarından gelen bara voltajı, yükteki değişikliklere rağmen STATCOM tarafından kontrol edilmiştir. Öncelikle STATCOM'un çalışma prensibi incelenmiş, ardından STATCOM, Mardin İli Kızıltepe İlçesi'nde bulunan bir enerji iletim sisteminin dağıtım sistemine kurularak MATLAB programında simülasyonu gerçekleştirilmiştir. Simülasyon sonucunda, STATCOM'un bara voltajını istenen değerlerde tuttuğu, yük değişimlerine karşı hızlı reaktif kompanzasyon sağladığı ve sistemin gerilim kararlılığını artırdığı gözlemlenmiştir.
Cite This Article
References (29)
- [1] Duman S. “Solving the reactive power planning problem involving FACTS devices using hybrid PSOGSA algorithm’’. Duzce University Science and Technology Journal, 6(2018), 1234-1257, 2018.
- [2] Gumus TE, Yalcin MA. “Effects of FACTS devices voltage stability’’. Sakarya University Institute of Science Journal, 17(2), 161-166, 2013.
- [3] Coteli R. Power Flow Control with STATCOM. MSc Thesis, Firat University, Elazig, Turkey, 2006.
- [4] Ertay MM, Aydogmus Z. “Facts applications in power systems’’. SDU International Technologic Science, 4(2), 40-58, 2012.
- [5] Ertay MM. Control of Energy Transmission Systems with UPFC. MSc Thesis, Firat University Institute of Science, Elazig, Turkey, 2006.
- [6] Dirik H. Investigation of the Effect of STATCOM and SSSC Controllers on Power System Voltage Stability. MSc Thesis, May Nineteen University Institute of Science, Samsun, Turkey, 2006.
- [7] Gencer E. D-STATCOM Effects on Voltage Sags in Medium Voltage Networks. MSc Thesis, Sakarya University Institute of Science, Sakarya, Turkey, 2018.
- [8] Kabalci E, Tasdemir O. “Design of analysis of D-STATCOM for improving power quality in micro grids’’. Journal of Polytechnic, 24(2), 361-372, 2021.
- [9] Fevzi C. Improving Voltage Quality with D-STATCOM in Distribution Networks. MSc Thesis, Van Centennial University Institute of Science, Van, Turkey, 2018.
- [10] Lawal MO, Lateef RG, Rasheed SO. “Incorporating STATCOM into a hydro-thermal optimal power flow algorithm’’. Turkish Journal of Science & Technology, 20(2), 523-540, 2025.
- [11] Yanmaz K, Mengi OO, Altas IH. “Five level BMD STATCOM in the solar panel/fuel cell hybrid clean energy system’’. The Blacksea Journal of Sciences, 6(14), 30-44, 2016.
- [12] Bakir H, Kulaksiz AA. ‘’Performance analysis and simulation of solar PV-wind hybrid energy system with STATCOM using MATLAB/simulink’’. Nevsehir Science and Technology Journal, 7(2), 135-144, 2018.
- [13] Dosoglu MK, Demirbas M. “Investigation of voltage stability for the steady and transient state in power systems with STATCOM- fuel cell’’. International Journal of Technological Sciences, 15(3), 95-102, 2023.
- [14] Fadhil ST, Hamad MS, Arslan AO, Vural AM. “Comparison of dynamic performances of STATCOM, SSSC, IPFC, and UPFC on inter-area oscillation damping’’. The International Journal of Energy & Engineering Sciences, 5(2), 62-79, 2020.
- [15] Mishra SK, Tripathy LN, Swain SC. “A DWT based differential relaying STATCOM integrated wind fed transmission line”. International Journal of Renewable Energy Research, 8(1), 476-487, 2018.
- [16] Chandarahasan C, Percis ES. “Optimizing resilience in large-scale integration of renewable energy sources: exploring the role of STATCOM device’’. International Journal of Power Electronics and Drive Systems, 15(3), 1468-1477, 2024.
- [17] Hussain AN, Ali AJ, Ahmed FS. “Power quality improvement based on hybrid coordinated design of renewable energy sources for DC link channel DSTATCOM’’. International Journal of Electrical and Computer Engineering, 10(5), 5108-5122, 2020.
- [18] Ribeiro L, Simonetti D. “Voltage-controlled and current-controlled low voltage STATCOM: a comparison”. Renewable Energy and Power Quality Journal, 20, 536-541, 2022.
- [19] Moufid I, En-nay Z, Naciri S, Moussaoui HE, Lamhamdi T, Markhi HE. “Impact of static synchronous compensator STATCOM installation in power quality improvement’’. International Journal of Power Electronics and Drive Systems, 13(4), 2296-2304, 2022.
- [20] Kirmani S, Kumar B. “Power quality improvement by using STATCOM control scheme in wind energy generation interface to grid”. International Conference on Power and Energy Engineering, Ottowa, Canada, 13-15 September 2017.
- [21] Ertay MM, Aydogmus Z. “Voltage control in a power transmission system with STATCOM’’. Dumlupinar University Science Institute Journal, 21, 91-105, 2010.
- [22] Burhan N. Study of STATCOM for Voltage Compensation in 14-Bus IEEE Grid. MSc Thesis, Uppsala Universitet, Sweden, 2024.
- [23] Singh MK, Saxena N. “Performance analysis and comparison of various FACTS devices in power system’’. International Journal of Electrical, Electronics and Computer Engineering, 2(2), 40-46, 2013.
- [24] Bakir H. Modeling and Optimization of Solar-Wind Hybrid Microgrid with STATCOM. PhD Thesis, Konya Technical University, Konya, Turkey, 2021.
- [25] Dosoglu K, Ozturk A, Saracoglu B. “Investigation of the effect of STATCOM and SSSC on static voltage stability in continuous load flow’’. SDU International Technological Science, 3(3), 23-34, 2011.
- [26] Shobole AB. “STATCOM application to increase voltage stability of wind farms’’. European Journal of Technique, 13(2), 2536-5010, 2023.
- [27] Uzunovic E, Canizares A, Reeve J. “Fundamental frequency model of static synchronous compensator”. North American Power Symposium (NAPS), Laramie, Wyoming, USA, 13-14 October 1997.
- [28] Eminoglu U, Herdem S, Yalcınoz T. “Voltage control with reactive power compensation using inverter based facts devices’’. 10th National Congress of Electrical, Electronics and Computer Engineering, Istanbul, Turkey, 18-21 September 2003.
- [29] Türkiye Electricity Transmission Joint Stock Company 16th Regional Directorate. ‘‘Kiziltepe Serkan Ay 33 kV STATCOM 1 Data’’. Mardin, Turkey, 2022.