| THERMOPHYSIOLOGIAL COMFORT PROPERTIES OF DIFFERENT CLOTHES AFTER AN ACTIVITY PERIOD | Esra TAŞTAN ÖZKAN,BİNNAZ KAPLANGİRAY,UFUK ŞEKİR | 1–11 |
| The Evaluation of Service Quality in Health Sector with Multi-Criteria Decision Making Methods: A Case Study in Ankara | Leman İnci ÇANAKÇI YÜKSEL,Murat ARIKAN | 13–30 |
| The Effect of Initial Curvature Imperfections on the Behavior of Flat Double Layer Grid Systems According to Support Condition and Module Number | Mojibullah NOORİ,Nurten TOPALOĞLU,Mustafa TEMŞİ,Hakan TÜRKER | 31–46 |
| Mechanical and Physical Properties of Lightweight Blocks with Expanded Perlite Aggregate | NİHAT KABAY,Ahmet Beşer KIZILKANAT | 47–58 |
| Modeling of Electricity Production From Canakkale Strait Currents | Muzaffer YÜCEL,İsmail TARHAN | 59–73 |
| SYNCHROTRON RADIATION: FROM STORAGE RING TO A HARD X-RAY BEAMLINE | Didem KETENOGLU | 75–87 |
| Treatment of Anaerobic Digestion Effluent in Microalgal Bioreactors | Ülker Diler KERİŞ ŞEN | 89–108 |
| Investigation of the Properties of Marshall Samples Prepared with Different Warm Mix Additives | Akın İSTEK,TANER ALATAŞ | 109–126 |
| Nano Boyutlu Vücut Merkezli Kablosuz Ağların Alveolar Alanları ve İnsan Dokuları İçin Numerik Analiz | MUSTAFA ALPER AKKAŞ | 127–140 |
| NUMERICAL ANALYSIS OF THE ALVEOLAR SPACES AND HUMAN TISSUES FOR NANOSCALE BODY-CENTRIC WIRELESS NETWORKS | Mustafa Alper AKKAŞ | 127–140 |
| NUMERICAL ANALYSIS OF THE ALVEOLAR SPACES AND HUMAN TISSUES FOR NANOSCALE BODY-CENTRIC WIRELESS NETWORKS | Mustafa Alper AKKAŞ | 127–140 |
| EVALUATION OF REINFORCING BARS RATIO EFFECTS ON SCC BEAM-COLUMN JOINT PERFORMANCE | Hamid FARROKH GHATTE | 141–151 |
| Structural, magnetic and magnetic fluid hyperthermia application of La0.7Ca0.1K0.2MnO3 | Atakan TEKGÜL | 153–163 |
| Comparison of Some Properties of Yarns and Fabrics Produced by Conventional Ring and a New Modified Ring Spinning Systems | Gözde BUHARALI,Sunay ÖMEROĞLU | 163–181 |
| Developing a System for Minimizing Seat Belt Negative Effects on the Human Health in the Vehicle during the Accident | Reşat Oğuzhan SÜMER,Betül GÜLÇİMEN ÇAKAN,Mustafa Cemal ÇAKIR,Agah UĞUZ | 183–198 |
| Analysis of Eccentric Faults of Induction Motor by Using Shannon Entropy | Abdurrahman ÜNSAL,Selahattin GÜÇLÜ | 199–210 |
| Inventory Classification In Metal Sector With Fuzzy ABC-VED Analysis | Cansu DAĞSUYU | 211–220 |
| Enrichment of the Fine Grained Coal Sample by Magnetic Separator | Öykü BİLGİN | 221–230 |
| Effect of Number of Surface Fiber Layers on Flexural Behavior in Three Dimensional Integrated Woven Spacer Reinforced Sandwich Composites | Rukiye ERTAN,Abdil KUŞ,İsmail DURGUN | 231–240 |
| Effect of Number of Surface Fiber Layers on Flexural Behavior in Three Dimensional Integrated Woven Spacer Reinforced Sandwich Composites | Rukiye ERTAN, Abdil KUŞ, İsmail DURGUN | 231–240 |
| Investigation of the Effect of Infill Wall on Structural Irregularities and Performance on an Existing Structure | Osman Fatih BAYRAK,Murat BİKÇE | 241–253 |
| Finite Element Modeling of Flexural Behavior of Unreinforced and Fiber Reinforced Polymer Strengthened Reinforced Concrete Beams | Kanat Burak BOZDOĞAN,Hasan Orhun KÖKSAL,Selen AKTAN | 255–272 |
| Model Updating of a Vehicle Seat Finite Element Model by the Response Surface Method | Hakan GÖKDAĞ,Yılmaz ARISOY,OSMAN KOPMAZ | 273–290 |
| Reinforced Concrete Cantilever Retaining Wall with the Shear Key Design by Using Rao_1 Optimization Algorithm | Elif Nur KALEMCİ,Sabriye Banu İKİZLER,Tayfun DEDE,Zekai ANGIN | 291–308 |
| EVALUATION OF THE RadFET RADIATION SENSOR PERFORMANCE IN 18 MV-EXTERNAL BEAM | Berk MORKOÇ,AYŞEGÜL KAHRAMAN,Di̇nçer YEĞEN,Ercan YILMAZ | 309–317 |
| Investigation of the Effects of Surface Protection Resin on Capillary Water Absorption of Döğer Tuff and Iscehisar Andesite | MUSTAFA YAVUZ ÇELİK,Murat SERT,Zeyni ARSOY | 319–338 |
| FINITE ELEMENT STRESS AND MODAL ANALYSIS OF BIMETAL SPUR GEARS | Tufan Gürkan YILMAZ,FATİH KARPAT | 339–345 |
| Development and Control of a Low-Cost and Portable Robotic Device for Wrist Rehabilitation | İbrahim KARABIYIK,Ergin KILIÇ,Atilla BAYRAM | 347–364 |
| Empirical Evaluation of Periodic Calculations for Frame+Shear Wall Type of Reinforced Concrete Buildings According to TEC-2019 Standard | Ceyhun AKSOYLU,Musa Hakan ARSLAN | 365–382 |
| THE HARMONIC ELIMINATION IN INVERTERS WITH METAHEURISTIC APPROACHES | Fahri VATANSEVER,Yiğit Çağatay KUYU | 383–395 |
| Weighting and Investigation the Effects of Vibration, Temperature and Sound Factors on Driver Performance | Şule BEKİRYAZICI,Recep EKEN,Güneş YILMAZ | 397–411 |
| A Dynamic Performance Evaluation For Performance Based Logistics: An Applicaton For Defense Industry | Mustafa AĞDAŞ,Cevriye GENCER,Özkan BALİ | 413–431 |
| Application of Multi-Response Taguchi Method on the Optimization of a Mini-Channel Cooling Block for the Developing Laminar Flow | MUHSİN KILIÇ,Sevgül ŞENTÜRK | 433–450 |
| A NOVEL METHOD FOR PERFORMANCE IMPROVEMENT OF SLOW START CONGESTION CONTROL METHOD IN PACKET SWITCHED NETWORKS | Barbaros PREVEZE | 451–467 |
| Investigation of Chemical Treatment Processes Effect on the Size Distribution of Olive Oil Mill Wastewater | B. Hande GÜRSOY HAKSEVENLER,Serdar DOĞRUEL,İdil ARSLAN ALATON | 469–482 |
| Important Factors in Project, Installation and Operation of Photovoltaic Systems | Abdulvahap YİĞİT,NURULLAH ARSLANOĞLU,Buket Seçil EKER | 483–489 |
| An Importance of Medical Imaging on Surgical Applications And Used Three Dimensional Anatomical Model | Hakan Burçin ERDOĞUŞ | 491–501 |
| Sustainable and Environmental Friendly Window and Glass Technologies for Energy Efficient Buildings: Recent Developments and Applications | Pınar MERT CÜCE,Tamer GÜÇLÜ,Ahmet B. BEŞİR,ERDEM CÜCE | 503–521 |
| Anaerobic Ammonium Oxidation (ANAMMOX) | Tuğba SARI,Bülent MERTOĞLU | 523–547 |
| Natural Organic Matter Removal From Drinking Water by Adsorption And Ion Exchange Process | Seda TÖZÜM AKGÜL,Şehnaz Şule KAPLAN BEKAROĞLU,Nevzat Özgü YİĞİT | 549–573 |